Photoshop Tablet Draws Straight Lines Problem

what the rotation of shortcut in photoshop for the Wacom Tablet?

MacBookPro retina. Photoshop CC 2015. Wacom Intuos Pro S.

Hello

The Rotation of touch and Rotation of the cycle Touch does not work in my Wacom tablet because I do not have the good shortcut.

I look around in Photoshop and I have not found.

Then I ask the furom Wacom and no response.

So, what the rotation of shortcut in photoshop for the Wacom tablet please?

Antoine,

I'm afraid I can't help you. I don't know any shortcut to turn in Wacom properties.

Try the latest version of the driver. According to the website the most recent driver is 6.3.14 (you mentioned another version)

Did you uninstall your old driver before installing the new? If not, try again because that could cause the problem...

Select new & mask tool - draw straight line with subtractive brush?

Thisblog:

To select it fast (W), Lasso (L) and brush (B), shift toggle tools subtract from selection to add to the selection

...

Click shift-click to paint a straight line between the first and subsequent

I have the selected brush, and he is set to subtract. I want to draw a straight line across topics I want to subtract. But I can't use shift to draw a straight line, as shift changes the subtractive brush in an addendum.

.. .this who am I missing?

I don't think you're missing something really, as you say press 'shift' to activate the version "+" of the Brush tool and so you will always get an addition to your selection if SHIFT-click between two points to give a straight line. If you really want to avoid using press SHIFT-click on the button 'invert' and then shift - click, when finished press "reverse" yet once and you should have what you want.

Problem with lines in Illustrator using the Wacom Tablet

Hi all

I have no idea why I'm having this problem in Illustrator. I use the small Intuos Pen Tablet (CTL-480), and my lines in illustrator is really strange. Even when I turn off the pressure in the brush settings, there is a gap in the line (it takes just one line of the same thickness). The Tablet works perfectly in Photoshop, but because I use the tablet to create art using plates (typography), it is easier and better for me to use illustrator. You are not sure that someone else had a similar problem or know maybe a setting I could change or try to fix it?

I have attached a picture of the problem.

Thank you for your help.

This is a known issue.

If all you want is a line single width, do not use brushes. Use the pencil tool and a simple blow

If you apply a calligraphy brush, apply the effect zig - zag to it with a value of 0, then a setting of about 100 (turn on the preview to adjust)

I have problems with photoshop and the creative cloud

I have the creative cloud and use to have Photoshop CC, but since I upgraded to El captain on my Mac I have more access to Photoshop - not even an option to load this program.  All of the suggestions.

Have you tried to sign your e-mail account and password? Search for "Buy this product" click on it and sign.

Choose straight line with METER and MAX works / help

Hello
I did a small database for a Bank model. I have 2 tables. Customers and customer representatives (customer_reps)
2 tables are related to eachother with customer REP ID (cust_rep_id)

It's my 1st request that gives me the total number of customers that each Cust. A. and Cust Rep. Names of Rep.
SELECT r.name, r.lname, COUNT (*)
From customers c, customer_reps r
WHERE c.cust_rep_id = r.cust_rep_id
R.lname GROUP, r.name

My 2nd query gives me the count of the total number of clients of the Cust. REP that has the largest number of customers. But this query gives only the total number

SELECT MAX (CNT) OF
(SELECT r.name, r.lname, COUNT (*) NTC
From customers c, customer_reps r
WHERE c.cust_rep_id = r.cust_rep_id
R.lname, r.name)

I want to write a query that gives me a result of 1 row naming "Cust." REP"with the largest number of clients and"total customer number"... by reading the forums I ve learned how use Count in a MAX function but not yet enough to display the result I want... any suggestions? and pls with explanation, I don't want to just copy paste... you want to learn logic...

Edited by: mtyson 16:30 04.Oca.2010

'a' is just an alias, you can use max like this...

SELECT *.
(SELECT r.NAME, r.lname, COUNT (*) NTC
From customers c, customer_reps r
WHERE c.cust_rep_id = r.cust_rep_id
R.lname GROUP, r.NAME
ORDER 3) a
WHERE a.cnt = (SELECT MAX (NTC)
(SELECT r.NAME, r.lname, COUNT (*) NTC
From customers c, customer_reps r
WHERE c.cust_rep_id = r.cust_rep_id
R.lname, r.NAME))

Align 45 does not... Some opinions, I cannot draw a line at 45 and 90 degree angle with a line (for example to draw a straight line with SHIFT tool, select and line maintenance, form does not hang at increments of 45 as it was by default) it Note still wo

Align 45 does not... Just noticed I can't align a line at 45 and 90 degree angle with a line (for example to draw a straight line with SHIFT tool, select and maintaining line, shape is not hang at increments of 45 as it was by default) it notes still works with forms & text etc, but not with a straight line. Having downloaded the latest January 14, 2016

Last update fixed this Glitch, Illustrator please :-)

How can I draw a straight line with a brush?

I know that the pencil tool can draw a straight line with anchor points. Is there a setting for the pencil tool which can mimic a brush of 30 points, low hardness (from left to right) at an angle of 80 degrees, or is it possible to make a straight line with the Brush tool using a mouse?

I know that this picture is a little blurry. what I want to do is to replace the 2 lines of white angles with point 30 brush effect 230 pixels wide. the project on the left side of the photo is a canvas 4 ' 2 ft. any ideas? Help, please.

Straight lines are simple: the brush, click where you want the starting line (you will paint one place) then hold down the SHIFT key and click where you want the line to end. Photoshop will draw a straight line between your departure and arrival.

In addition, for even more control, you can use the pen tool to create a path, then just STROKE the path with the brush.

Mike

How to draw a line (with the line segment tool) then draw another line, from those previous anchor point. When I try immediately draw another line on the other anchor lines it try to turn instead.

I'm following a course of basic fundamental illustrator on Lynda. The video of "draw straight lines" is troubling me. They draw a line with the line segment and then draw another line coming out the anchor point at an angle.

Here's where it is troubling me - when I try to drag a line to the anchor point trying to transform the first line, I drew. (the line cursor turns into a selection tool) I can't draw another line connecting the first.

Advice would be great because it's driving crazy me.

See you soon,.
Kyle

Yes, it is irritating. You must clear the previous line first. If you want to make sure that both ends are perfectly aligned, start by turning on the guides. If you want two lines to be part of the same way, you should use the tool pen instead.

I'm trying to draw a line with a pencil in Flash Professional and it disappears.

Seems simple, but... I'm trying to draw a line with a pencil in Flash Professional and it disappears.  It doesn't let me change the color of the line.  It shows grey hatched. Help please.

Values of alpha and the line weight must be greater than 0

How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

Hello friends, I have a license with terms of the photo with Photoshop and Lightroom applications installed on my iMac. Question: With this license can I install these applications also in my notebook? Using the same license.

Yes, individual licenses, ranging up to allow two simultaneous, activations facilities.

subscriptions allow mounting on an unlimited number of computers.  connection is limited to a maximum of two computers at a time.

So, I have creative cloud... It came with Photoshop and Lightroom... could I uninstall Lightroom and install Illustrator for the same price?

It came with Photoshop and Lightroom... could I uninstall Lightroom and install Illustrator for the same price?

No, you can not install Illustrator instead of Lightroom. You can buy Adobe Illustrator creative Cloud app unique: pricing and membership creative cloud plans | Adobe Creative Cloud

I have the plan of photography with photoshop and Lightroom 5. I tried to open a catalog I had created it said the photographs were again for the Lightroom I. I have a Mac and downloaded Didier, thinking I would get a new update of lightroom.

I have the plan of photography with photoshop and Lightroom 5. I tried to open a catalog I had created it said the photographs were again for the Lightroom I. I have a Mac and downloaded Didier, thinking I would get a new update of lightroom. It did not. Should I expect Lightroom cc and extra cost that would be for me?

Please open the app creative cloud on your computer and the gpo tot app tab. If you are not able to see the Lightroom CC listed, sign out and sign in the creative cloud.

Here is the screenshot for how you can download the application from the creative cloud

Thank you

Someone else to get errors 'droplets could not communicate with Photoshop"since the upgrade to LR2015 CC and CC 2015 PS on Windows?

Someone else to get errors 'droplets could not communicate with Photoshop"since the upgrade to LR2015 CC and CC 2015 PS on Windows?

I have a droplet which stretches from digimarc on my images.  Its working well for the past 2 years.  However the most recent upgrade to LR2015CC and PS2015CC its broken.  I did go back and manually install the digimarc plug-in (because it is no longer installed by default) in PS 2015 CC.  The drop works well when it is run within PS2015 CC however when I try to run it as part of "Post-processing, after export" in CC LR2015 I now get an error message "droplets could not communicate with Photoshop.  It worked in the latest versions of LR and Psalm

Anyone have this same problem?   It is a technique of very popular workflow for those of us who use digimarc.  I wonder if anyone else has encountered this and has a fix.

Thank you

Work around is to install the OLD PS CC2014 and restart the computer.  Then it magically connects to CC2015 PS without errors.

Photoshop Tablet Draws Straight Lines Problem

Source: https://www.eehelp.com/question/draw-straight-lines-with-photoshop-and-the-wacom-tablet-pen/